Publicité
Les langues disponibles
Les langues disponibles
Description of the amplifier:
1.Volume Control
2.Tone Control
3.Audio Input
A. Operation of the Amplifier:
Firstly, make sure the amplifier is available in the current power voltage.
1.
Using AC power supply:
Connecting with AC power, please switch to POWER ON position,
and the power indicator turns green ,it shows the amplifier works
normally(If suddenly AC power is cut off, the built –in rechargeable will supply power automatically);
2.
Using DC power supply:
Switch to POWER ON position, and the power indicator turns green, it works normally, it has a low power warning set, if
it's low battery, it will provides a "BEEP" sound to inform the users to charge the amplifier.
Caution: Please switch to "POWER OFF" position when you finish using the amplifier, otherwise, it will influence battery life
span.
B. Operation of bodypack:
1.
Open the cover, install the battery with correct polarity then close the battery cover.
2.
Switch to ON position, the indicator flash up then black out ,it means can work normally, please turn off the power after
using it.
3.
The best way to set the volume in half position and then you can adjust the volume you needs.
Caution:
1.
If the bodypack is ON, but the LED indictor is dim or off, it means the battery is low or you have placed the
battery wrong polarity.
2.
Please take out the battery if you do not want to use it for a period.
Operation BT-Technology:
Press "MODE" button to switch on the BT-function. Then use your mobile phone or computer to search a BT-device and
connect the ST012 with your device.
TROUBLESHOOTING:
The problems might be
The power indicator is dim
Hash Howl
Noise
UHF
No license required
BE
DK
F
HU
IT
NL
PT
RO
SI
CH
GB
Belgium (BE), Denmark (DK), France (F), Finland (FI), Germany (DE), Hungary (HU), Italy (IT), Netherlands (NL), Norway (NO),
Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Spain (ES), Sweden (SE), Switzerland (CH), Great Britain (GB)
4.USB socket
5.Wired mic input
6.Power On/Off
Reasons and Resolutions
It indicates the battery low, please change to AC supply and
charge it immediately;
1. Turn down the volume of amplifier
2. Turn the tone control to Bass
3. Adjust the distant between amplifier and microphone ,do not
face the speaker of amplifier while using it
1. Battery low of the amplifier or transmitter;
2. The microphone cord might be damaged;
3. Interference by same frequency (863.100MHz).
(excluding geographical restrictions)
FI
DE
NO
PL
ES
SE
3
Publicité
