Publicité
12
iNSPIRE iP82/iP15B/iP12B
8. WAIT for the speakers to link.
9. Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the SLAVE speaker will
receive the right channel.
10. MASTER and SLAVE connection will be indicated on the main, top-level DSP screens.
Channel Routing for Audio Streaming
A dedicated iOS control app for TURBOSOUND Bluetooth speakers can be downloaded from the Apple Store.
Subwoofer
1 Speaker connected
Mono combination: left + right
2 Speakers connected
Left channel
Master Speaker
2 Speakers connected
Mono selected
Mono Left + Right
Both Speakers
2 Speakers connected
Right channel
Slave Speaker
Bluetooth Control
A dedicated iOS control app for TURBOSOUND Bluetooth speakers can be downloaded from the Apple Store.
In both mono and stereo mode, fi rst pair the MASTER speaker, and then launch the iOS control app.
•
The iOS control app will automatically detect and adapt for mono or stereo mode.
•
To alter the speaker settings, swipe the screen or press the settings icon. All iP speaker settings can be accessed from the iOS control app.
•
Satellite Output 1
Satellite Output 2
Left Channel of streamed signal
Right channel of streamed signal
Left channel
Left channel
Mono Left + Right
Mono Left + Right
Right channel
Right channel
Main Page (1 speaker)
Main Page (2 speakers linked)
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by qualifi ed personnel with the required experience and
certifi cation to perform the necessary tasks. Walls, fl oors or ceilings must be capable of safely and securely supporting the actual load. The mounting accessory used must be
safely and securely fi xed both to the loudspeaker and to the wall, fl oor or ceiling.
When mounting rigging components on walls, fl oors or ceilings, ensure that all fi xings and fasteners used are of an appropriate size and load rating. Wall and ceiling
claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular fi xing arrangement can be
safely employed for a particular load. Cavity plugs or other specialist fi xings, if required, must be of an appropriate type, and must be fi tted and used in accordance with the
maker's instructions.
The operation of your speaker cabinet as part of a fl own system, if installed incorrectly and improperly, can potentially expose persons to serious health risks and
even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualifi ed and certifi ed (by local state or national
authorities) personnel prior to any installation or fl ying.
Make sure that speaker cabinets are set up and fl own by qualifi ed and certifi ed personnel only, using dedicated equipment and original parts and components
delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group, including the MUSIC Group companies listed on the enclosed
"Service Information Sheet", assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular
checks must be conducted by qualifi ed personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is fl own, the
area underneath the speaker is free of human traffi c. Do not fl y the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic fi eld, even if not in operation. Therefore, please keep all materials that can be aff ected by such fi elds (discs, computers, monitors, etc) at a
safe distance. A safe distance is usually between 1 and 2 metres.
Quick Start Guide
13
Settings Page
Publicité
