VonHaus 3500103 Mode D'emploi page 6

E
E
For Normal Cutting Operations:
The top of the rollers (F) should be level with the
surface of the Mitre Saws rotary table.
The extension arm(s) should be positioned be give
maximum support to the workpiece.
4
ASSEMBLY
6. The Holding Bars (E) are held to the stand by
a spring mechanism and rubber grips. To attach,
squeeze the Rubber Grip Handle as you place the
Mitre Saw Holding Bar onto the Stand.
Once in position, releasing your grip on the Rubber
Grip Handle will secure the Holding Bar onto the
stand.
IMPORTANT: Check all Screws, Bolts, and Locking
Grips are secure and that the Mitre Saw Stand is
sturdy before use.
IMPORTANT: Do not over-tighten any components.
This can damage the Mitre Saw Stand and affect the
stands safe operation.
F
F