Faq - iCarsoft CR Plus Mode D'emploi

iCarsoft English User's Manual

7 FAQ

questions and answers relating
Here we list some frequently asked
to iCarsoft Serial products / CR Plus.
Question: System halts when reading data stream. What is the
reason?
Answer: It may be caused by a slackened connector. Please
turn off the iCarsoft Serial products / CR Plus, firmly connect the
connector, and switch on it again.
Question: Screen of main unit flashes at engine ignition start.
Answer: Caused by electromagnetic disturbing, and this is
normal phenomenon.
Question: There is no response when communicating with on-
board computer.
Answer: Please confirm the proper voltage of power supply and
check if the throttle has been closed, the transmission is in the
neutral position, and the water is in proper temperature.
Question: Why are there so many fault codes?
Answer: Usually, it's caused by poor connection or fault circuit
grounding.
Note: All pictures illustrated here are for reference and demonstration
purpose only and this User's Manual is subject to change without prior
notice.
20