Maintenance And Cleaning Instructions; Cleaning And Storage; Environment Safety; Customer Service - VITO VILALC10 Mode D'emploi

EN
5. MAINTENANCE
AND CLEANING
INSTRUCTIONS
This device does not need additional
lubrication or maintenance. However,
it needs a proper
and a regular cleaning to operate
continuously with no issues.
Before inspection, maintenance and
cleaning works, turn the equipment off
and remove the batteries.
5.1 - CLEANING
AND STORAGE
Cleaning
After each use clean
components. Clean the machine with a
clean and damp cloth and blow it with
low pressure compressed air. A careful
handling protects the machine and
extends its lifespan.
Storage
Every time the laser is not being used,
store it inside dry, clean and corrosive
steam free places away from children's
reach. Remove the batteries when
storing the device.
6. ENVIRONMENT
The packaging is made of
recyclable materials, which
can be disposed on local recycling
maintenance points.
Never place power tools in
the domestic waste!
According to the European Directive
2012/19
electronic equipment waste and its
transposition into national law, power
tools must be collected separately
and delivered to the collection sites
provided for this purpose.
all the
In accordance with European Directive
2006/66/EC, defective or used
batteries must be collected separately
and delivered to the designated
collection points.
You can obtain information regarding
the disposal of the machine through
the person in charge for the recycling
in your city.
Tel.: 00351 256 331 080
E-mail: sat@centrallobao.pt
Site: www.centrallobao.pt
SAFETY
/EC on electrical
7. CUSTOMER
SERVICE
and
21