Characteristics; Maintenance; Cleaning; Metrological Inspection - Chauvin Arnoux ORITEL ANC 100/15 Notice De Fonctionnement

- Fasten an angle protractor to the horn and place the zero of the protractor strictly in the horn's vertical
axis.
- Place the ATM 100 attenuator located after the OND 100 wavemeter in its zero position.
- Rotate the receiving horn by an α angle and calculate the corresponding attenuation.
- Identify the indication given by the galvanometer of the IR 205.
- Bring the receiving horn back to the α = 0 position.
- Attenuate using the ATM 100 attenuator until you return to the previously identified indication and
identify the indication on the attenuator.
- Carry out several manipulations, each time giving α different values.
Frequency: 8.5 to 9.6 GHz
Centre frequency gain: 15 dB
Width of the beam at F
Waveguide: R100
Flange: UBR 100
Weight : 395 g
Dimensions: 132.5 x 80 x 68.5 mm
Electromagnetic compatibility:
Compliance with the NF EN 61326-1 standard, 1998 edition.
For maintenance, use only specified spare parts. The manufacturer will not be held responsible
for any accident occuring following a repair done other than by its After Sales Service or approved
repairers.
5.1

Cleaning

Before assembling the educational bench's microwave components, make sure that no dust is present
inside the waveguide.
CAUTION!
Do not use a pressurised air jet for fear of damaging certain components.
Do not use solvent, and take precautions when dusting.
5.2

Metrological inspection

It is essential that all measuring instruments are regularly calibrated.
For checking and calibration of your instrument, please contact our accredited laboratories (list on request)
or the Chauvin Arnoux subsidiary or Agent in your country.
n Repairs under or out of guarantee
Please return the product to your distributor.
Our guarantee is applicable for twelve months after the date on which the equipment is made available
(extract from our General Conditions of Sale, available on request).

4. CHARACTERISTICS

: 30° in both planes
0

5. MAINTENANCE

6. GUARANTEE

18