Tool Specifications - Stinger CS150B Mode D'emploi

Operating Pressure
Weight
Staple Capacity
Cap Capacity
Air Inlet
Fasteners
Audio Data
Vibration Data
Air Consumption
*May require depth adjustment on tool depending on materials used and length of fastener used

TOOL SPECIFICATIONS

80 - 110 PSI*
4.5 lbs | 1.9kg
200 staples (2 - 100 count strips)
200 collated plastic caps (1 reel)
1/4" | 6.35mm
STINGER® StaplePac® only. Each 2000 count StaplePac
consists of 20 strips of 5/8", 7/8", 1-1/4", & 1-1/2" | 16mm,
22mm, 32mm & 38mm, 18 gauge staples (100 staples
per strip) and 10 reels of 25mm diameter collated plastic
caps (200 caps per reel).
Loudness levels presented in the table below are in
accordance with EN 792-13 (EN12549+A1:2008)
LpA 1s,1m = 86,7 dB(A)
LwA 1s = 99,7 dB(A)
LpA 1s, = 90,7 dB(A)
These levels are characteristic of the tool but does not
represent the sound that occurs at the point the tool is
used. Workstation design can reduce the noise levels, for
example by placing the work piece on sound absorbent
supports.
This value is in accordance with EN 792-13
(ISO 8662-11:1999)
Equivalent Vibration Value = ahv,eq (m/s2) = 3,3
This value is characteristic of the tool and does not
represent the effect of the hand-arm system when using
the tool.
0.75 liters at 7 bar operating pressure
3