Konig Computer CMP-WNROUT30 Mode D'emploi page 4

3. After the IP address setup is complete,
please click „start" -> „run" at the bottom-
lower corner of your desktop, then input
„cmd" and click „OK".
HERE!
5. Start the web browser and input the IP
address of wireless router in address
bar, and the following message should
be shown. Please input user name and
password, then click „OK" to access web
management interface of wireless router.
Default user name: admin
Default password: 1234
4
4. Input „ipconfi g", then press
„Enter" key. Please check
the IP address followed by
„Default Gateway" (In this
example, the IP address
of router is 192.168.2.1)
Please note that this value
may be different.