Westinghouse WFVCR290BK Instructions page 5

Les langues disponibles

BATTERY

Battery charging

After switching off the power switch of the vacuum cleaner, you can connect the

power adapter to power supply and insert the other end into the charging interface

of the vacuum cleaner.

In case of low power, the red light of button [Start/Suspend] will flicker.

In the charging process, the green light of button [Start/Suspend] will flicker.

Once the battery is fully charged, the green light of button [Start/Suspend] will

be on constantly.

When the product is charged for first time, please ensure charging it for 6

hours at least.

When the product is turned on and charged, if you remove the power adapter,

the "Start/Suspend" light will flicker in red and green alternatively to remind

you that the power switch is not turned off. If you do not use the machine,

please turn off the power switch.

Please charge the machine fully after you finish using it every time.

In order to protect the battery, please charge it every 2 months when the

machine is not in use for a long time.

BEFORE FIRST USE

Carefully take the device and its accessories out of the packaging. Retain

the packaging in case you would like to store the device away or transport it

at a later date. If you choose to dispose of the packaging, then please do so

according to the applicable legal regulations.

Check the packaging contents for completeness and damages. Should the

contents in the packaging not be complete or be damaged, do not use the

device. Return it to your retail outlet immediately.

Clean the device and all accessories before the first use. Refer to the chapter

CARE AND MAINTENANCE.

Preparing your cleaning area

Avoid anything wet.

Before using this device, pick up objects like clothing, loose papers, pull cords

for blinds or curtains, power cords, and any fragile objects. If the device passes

over a power cord and drags it, there is a chance an object could tumble off a

table or shelf.

This product may not be able to stride the vertical step about 8 mm high.

USING THE ROBOTIC VACUUM CLEANER

Operation

START/SUSPEND

Switch on power and press [Start/Suspend] key on the remote control or the

button "Start/Suspend" of the machine.