Publicité
Les langues disponibles
Les langues disponibles
Installation
Cable Connection:
A standard USB cable (USB to Mini Type B) can be used to connect to a computer loaded with ICS
software. Maximum cable length 2 meters.
Auxiliary Handle Mounting:
Mount Auxiliary Handle on Gear Case with Plastic Handle positioned in the groove. Hand tighten.
Hanger Connection:
Insert ends of Hanger into sides of housing.
Adjustments
●
Disconnect the tool from the battery before making any adjustments or changing accessories.
Such preventive safety measures reduce the risk of starting the tool accidentally.
Storage
Disconnect the battery from the tool when not in use.
Parts and Maintenance
Tool service is recommended every 20,000 cycles or one year, whichever comes first. Tool repair
and maintenance should only be carried out by an authorized trained personnel. When such
service or repair is required, locate the nearest Ingersoll Rand Authorized Service Center.
For Authorized Trained Personnel:
For 'Assembly/Disassembly' and other maintenance instructions regarding these products, see
Maintenance Information Form 47104302, located at www.ingersollrandproducts.com or contact
the nearest Ingersoll Rand Office or Distributor.
Environmental Protection
When the life of an Ingersoll Rand electrical product has expired, it must be recycled in
accordance with all applicable standards and regulations (local, state, country, federal, etc.).
Improper disposal may endanger the environment.
Symbol Identification
Return waste material for
recycling.
Original instructions are in English. Other languages are a translation of the original instructions.
47104286_ed3
WARNING
NOTICE
Do not dispose of this
product with household
waste material.
Li-Ion
Product contains Lithium-Ion.
Do not dispose of this product
with household waste material.
EN
EN-2
Publicité
