Mayer Barbecue EMG-200 PRO Guide De Montage page 10

EN
Part list
Start up
MIN.
MAX.
D
C
A
B
Clean the pizza oven and the pan thoroughly with a slightly damp cloth and a mild detergent before using for the first
time. Then dry with a soft cloth.
Insert the glass lid into the grill by inserting the fixed pin into the intended receptacle and then first pushing back the
movable pin and then inserting it into the receptacle opening.
Before you connect the appliance to the power supply system, check whether the supply voltage complies with the
information on the type plate.
When you are ready to use the grill, be sure that the TIMER Control is in the "OFF"position and unplugged.
We recommend a trial run to familiarize yourself with your grill and to eliminate any productions remainings or
protective oil.
Insert the power plug in an earthed socket (220-240 V). IMPORTANT: do not clamp power cables. Do not let cables
hang down and be careful that they do not become a trip hazard.
Select heating level „HI" by the pressing the switch on the base and set the TIMER Control to "10" minutes.
A small amount of smoke and odor may be detected. This is normal.
This Mayer Barbecue electric grill is not intended for the industrial use.
10
www.mayergrill.com
PART LIST & START-UP
E
A
B
A - Power Indikator
B - Working Indikator
C - TEMP Adjusting
D - FUNCTION Switch
E - Timer