Visonic WCDMA-3G PG Instructions D'installation page 2

Inserting the SIM card
External cellular antenna installation - Optional
PowerMaster-10 G2, PowerMaster-30 G2 and
PowerMaster-33 G2
Mount the optional cellular external antenna on
the desired site surface, connect its connector to
the internal WCDMA-3G module and insert the
SIM card.
Fig. 4a Optional external cellular antenna
A. External cellular antenna
If required to remove the external antenna, hold the connector but not the cable and pull it out. This prevents damage to the PCB.
2
Fig. 3 SIM card insertion
1. Push out the removable insert for the external antenna, see figure 4b for details.
2. Connect the external antenna to the RF switching connector, see figure 4b for details.
A
PowerMaster-10 G2, PowerMaster-30 G2 and PowerMaster-33 G2:
PowerMaster-360R
Fig. 4b Optional external cellular antenna
Warning!
PowerMaster-360R:
D-307122 WCDMA-3G PG2 Installation Instructions
1. Slide top cover
2. Open cover
3. Align SIM card in cover (note cover orientation)
4. Slide SIM card into cover
5. Rotate cover to close
6. Lock cover to close
IMPORTANT!
Do not insert or remove the SIM card when the
control panel is powered by AC power or battery.