Phantom PHOTOBIO MX Instructions page 7

c. Place the light fixture on a flat platform. Unfold panels of the light fixture so that LEDs are
downward, as Fig. 3. Ensure hinge is fully extended and light panels are completely flat.
d. Use allen key (Part C) to fasten hinge hole A and B on both side hinges, as Fig. 4.
Step 2. Identify driver connection carefully, as Fig. 5.
AC Input power
Driver slots
connector
Dimming connector
AC side
(covered with a cap)
USER MANUAL
Fig. 3
Driver fastener hole
Hinge Hole A
Hinge Hole B
Driver fastener hole
Top
Bottom
Fig. 5
Fig. 4
Output connector
Driver slots
DC side
connector
7
TM