Publicité
Les langues disponibles
Les langues disponibles
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-10 | E-Mail info@wolff-tools.com |
Changing the Nylon Bar
Use the provided Allan
wrench to remove the five
screws, then hold the nylon
bar and carefully move it out
of nylon bar holder.
Warning: Do not put your
fingers against the sharp
edge of the blade at any time.
Transport
Insert the pin as shown to the
hole in the aluminum eccentric
cam and carry the cutter as
shown.
Internet
www.wolff-tools.de
9
Publicité
