Serene House Serene Pod Arc Manuel D'instructions page 6

Operating Instructions
• Please remove all packaging before use.
1 2
Peel away the color film
Plug the head of the AC
seal only on the Serene
Pod ® . Do not remove adapter into the power
the transparent micro
jack at the side of the
perforated film on the
main unit.
inner layer.
4-1
Plug USB cord into a power outlet.
8
3
Place the Serene Pod ®
onto the heating plate.
4-2
Plug USB cord into a adaptor, and
plug the adaptor into a power outlet.
5
• Press the power button to turn the power on.
• Press the power button again to select the
light color variations.
• Press the power button until the light goes off
to turn off the device, or press and hold the
power button for 3 seconds to hard shut off
the device.
Caution:
1. Only Serene Pod from SERENE HOUSE can be used with this product; do not heat liquids
®
or other objects in the heating plate.
2. Serene Pod can be heated repeatedly. If the scent fades or the diffusing performance
®
drops, please consider replacing the Serene Pod
item; please contact your local distributor for purchase.
3. Do not move or touch when this product is in use. Allow the wax inside Serene Pod
cool thoroughly into a solid form before handling the device or Serene Pod
4. Unplug from power source when not in use.
5. Always place this wax warmer on a firm, flat and level surface.
. The Serene Pod is a consumable
® ®
to
®
.
®
9