Brandson Equipment 303328 Mode D'emploi page 26

starts heating only if the thermostat setting is higher than the room temperature.
Using the two additional buttons at the back of the appliance, you can switch the
heat setting 2 and the oscillation On or Off.
7. Overheating
1
2
1
2
Overheating generally occurs only if one of the openings of the fan heater is
blocked. This appliance comes with a non self-resetting thermal fuse. The heater
switches off automatically once the overheating temperature is reached. The fan
heater can be operated again only after the fuse is replaced by the manufacturer
or by an equally qualified person.
26
Second heat setting (1200W) On/Off
Oscillation On/Off
English