English - IKEA TRADFRI E1526 Mode D'emploi

ENGLISH

QUICK GUIDE
If you have an IOS device:
Go to the App Store and download the TRÅDFRI app. The
app will take you through the process of installing your
gateway and other devices.
If you have an Android device:
Go to Google Play and download the TRÅDFRI app. The
app will take you through the process of installing your
gateway and other devices.
GATEWAY FUNCTIONS
ON/OFF
Light off: The power is off
Light on: The power is on
Network
Light off: There is no TRÅDFRI network.
Light pulsing: No connected TRÅDFRI devices are
found.
Light on: Your TRÅDFRI network is connected.
Internet
Lights off: There is no Internet connection.
Lights pulsing: You are not properly connected to
the Internet.
Lights on: There is an Internet connection.
Pairing: Follow the instructions below to add IKEA
Smart Lighting products to your system.
ADDING DEVICES TO YOUR GATEWAY
You cannot add light sources directly to your gateway. A
TRÅDFRI steering device is needed to add them.
ADDING STEERING DEVICES TO YOUR GATEWAY
To add steering devices, just follow the steps below:
If you have an IOS device:
Go to the App Store and download the TRÅDFRI app. The
app will take you through the process of adding devices.
If you have an Android device:
Go to Google Play and download the TRÅDFRI app. The
app will take you through the process of adding devices.
FACTORY RESET
Open and remove the gateway lid. Push a pin into the
pinhole on top of the gateway for at least 5 seconds.
IMPORTANT!
— The gateway is for indoor use only and can be used in
temperatures ranging from 0ºC to 40 ºC.
— Do not leave the gateway in direct sunlight or near
any heat source, as it may overheat.
— Do not subject the gateway to wet, moist or
excessively dusty environments, as this may cause
damage.
— The range between the gateway and the receiver is
measured in open air.
— Different building materials and placement of the
units can affect the wireless connectivity range.
4