Publicité
Les langues disponibles
Les langues disponibles
Battery Charging & Power Use
foxL has the versatility of two power options (V2), internal re-chargeable battery or externally
charging via AC adapter or USB
For INITIAL CHARGING, use wall-socket AC and the foxL power supply. Allow about 4 hours
(until LED goes green). Subsequent rechargings using AC will require only about 1 hour.
5V Power Supply Input
(connect to 5 V power supply
to wall AC and foxL)
Power notes:
• A fully charged battery will play for about
5 hours, depending upon volume levels.
• During the last 10% of a charge, output
volume will be reduced.
• Power output is doubled when it is
connected to wall AC, enabling it to play
louder than with battery power.
English
LED Charge Indicator
RED = charging;
GREEN = 100% charge;
BLINKING RED = using more
power than incoming
USB Input for Charge/Power
• During non-use, USB recharging takes
about 4 hours, depending upon current
available at USB port.
• USB charges to 95% of full capacity,
and LED may stay red
10
Bluetooth Operation
(Bluetooth-equipped models)
BEFORE you begin be sure your phone (or other
A2DP Bluetooth device) is able to play/stream
music.
1) Switch foxL ON , front LED button shows
amber, then flashes green while searching
2) Bluetooth will auto-search for the last five
previously paired units (for up to 30 seconds).
3) Once paired, the front LED button will
continue to flash green.
4)If Bluetooth can't discover prior paired units, it
will search for new units to pair with.
5) If Bluetooth can't pair successful (about 2 and
half minutes), it will auto turn off.
Follow your device's instructions for Bluetooth
Pairing. (Each is different!) Initial pairing code is
0000.
Some take just seconds to pair, and some are less
friendly and can take longer.
English
If given an option in the transmitter setup,
select "headphone," NOT "headset."
Call Functions
• Answer Incoming Call - Push Bluetooth
button < 1.5 seconds
• End Active Call – Push Bluetooth button
< 1.5 seconds
• Reject Incoming Call – Push/hold button
> 1.5 seconds
• Manually Turn-off Bluetooth Circuitry –
Push/hold button for 5 seconds
Visit www.soundmatters.com for more info.
Bluetooth Button
(Bluetooth-equipped models)
11
Publicité
