Weidmüller Klippon TB QL Consignes De Montage page 5

Opening of the Enclosure
Opening the lid
Loosen the lid cover fixings screws with a suitable tool (refer to diagram 1
below). After loosening the covers screws, the lid can be opened up to ap-
proximately 130°.
Removing gland plates
If gland plates are to be used remove them by loosening the gland plate
screws with a suitable tool. Afterwards the plates can be detached.
Tightening Values
Lid & Gland plates (when present)
M10 earth stud (out-/inside)
M6 earth stud inside
1 2
2.5 Nm
15.0 Nm
6.0 Nm
5