IMPORTANT INSTRUCTIONS
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL
INJURY, INCLUDING THE FOLLOWING:
Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Use grip handle to move the heater.
Keep flammable materials such as curtains, furniture, pillows, bedding, papers, clothes,
and curtains at least 3 feet (0.9 m) from the front of heater and keep them at least 1 foot
(0.3m) away from the sides and rear of the heater.
Extreme caution is necessary when any heater is used by or near children or invalids
and whenever the heater is left operating and unattended.
Always unplug heater when not in use.
Do not use any heater
has been dropped or damaged in any manner. Discard heater or return to an
authorized service facility for examination and/or repair.
Do not use outdoors.
This heater is not intended for use in bathrooms, laundry areas or other similar indoor
locations. Never locate heater where it may fall into a bathtub or other water container.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Arrange cord away from
traffic areas and place it where it will not be tripped
To disconnect heater, turn controls to off, then remove plug from outlet.
Do not insert or allow foreign objects to enter ventilation or exhaust openings, as this
may cause an electric shock or fire, or damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not
use on soft surfaces, like a bed, where openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in areas where
gasoline, paint, or flammable liquids are used or stored
Use this heater only as described in this manual. Any other use not recommended by
the manufacturer may cause fire, electric shock, or injury to persons.
Always plug heaters directly into a wall outlet/receptacle. Never use with an extension
cord or relocatable power tap (outlet /power strip).
This heater is equipped with a polarized alternating current line plug (one blade wider
than the other).This plug fits into the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
still won't fit, contact an electrician to replace the outlet. Do not defeat the safety
purpose of polarized plug.
with a damaged cord or plug or after the heater malfunctions or
over.
2