Removing Hair And Debris From The Turbo Brush; Troubleshooting - Sunbeam 27499 Manuel D'instructions

REMOVING hAIR AND DEBRIS FROM
ThE TURBO BRUSh
1. Remove the turbo brush from the plastic tube.
2. Turn the knob on the turbo brush counter-clockwise until the knob is visibly off
the transparent cover.
3. Remove hair and other particles from the brush.
4. To reassemble, put the transparent cover back on top and tighten the knob clockwise.
Figure 5

TROUBLEShOOTING

PROBLEM
Vacuum cleaner won't run
Vacuum cleaner won't run
Vacuum cleaner won't
pick up dirt
Vacuum cleaner won't pick up
dirt
Figure 6
CAUSE
Vacuum cleaner is not fully
plugged in.
No voltage in wall plug
Dust Bin is full
Hose, Wands, Dust Cup
or Floor Nozzle clogged with
a large object
6
SOLUTION
Plug in fully and turn
switch to ON position
Check fuse or breaker
Empty Dust Bin
Remove substance