INVENTOR FT403W Manuel D'utilisateur page 7

OPERATION INSTRUCTIONS
Ι. Τilt adjustment
To adjust the tilt of the air flow upwards or downwards, push the motor housing lightly to the
desired direction.
II. Speed adjustment
There are 3 speeds available. To adjust the fan speed, press the relative buttons located on the
bottom of the fan body (1=low/2=medium/3=high/0=off)
III. Oscillation adjustment
To adjust the oscillation press the button located on the left side of the motor housing.
IV. Chassis mounting
To release the fan body from the chassis, simply rotate the knob to the left and then lift the fan
from the base.
Speed adjustment
Oscillation adjustment
stop
oscillate
clutch
knob
Tilt adjustment
Manual
Chassis mounting
7
ΕΝ