Ebode TPC Guide Utilisateur page 8

Transmitter - Wireless Remote Control Ref : TPC
NOTE :
If the remote control is assigned to several ebode receivers, each push on the
On/Off key will activate all receivers set to the same address.
First row:
A brief press on the ON button, receivers with the same address will power on
or open (when used with shutter).
A brief press on the OFF button, receivers with the same address will power off
or close (when used with shutter).
Second row:
A brief press of the ON button, receivers with the same address will power on
or open (when used with shutter).
A brief press of the OFF button, receivers with the same address will power off
or close (when used with shutter).
Dimming function :
A long push on either key of the remote enables dimming function as long as a
dimmer receiver is set on same address.
To properly position a motorized shutter/ Home Cinema screen along with the
RMV receiver, just press once "up or down" followed by another push on the
same key to stop at the desired position.
Tips
- Knowledge base available on www.ebodeelectronics.eu
Receivers do not respond to wall switch command?
- Check and/or change the batteries if necessary.
- Check the radio signals transceiver RPT, RMA, RMV, TM13, CM15 or SC28
security console is powered on.
July 2009 page 8 TPC