General Information; Technical Data - Rise VIGILANT 500/I Manuel D'installation

GB
We thank you for having chosen one of our Vigilant model automatic rising bollards.
All articles in the Rise range are the fruit of long experience in the sector of mechanical and electronic automations.
This is why today we are able to offer extremely innovative and reliable automatic rising bollards that, thanks to their per-
formance, efficiency and durability, fully satisfy the final customer's requirements.
All our products are covered by a two-year warranty.
Furthermore, a product Civil Liability policy stipulated with a leading insurance company covers any damage to things or
persons caused by manufacturing defects.
The Vigilant 500/I automatic rising bollard, with its high resistance to impact and elegant design, is suitable for installation
in public or commercial areas and is particularly indicated for protecting of buildings.
The standard version, manufactured in steel, is painted with electrophoresis painting, a corrosion-proof treatment that
guarantees an extremely elevated resistance to the elements and to salty environments.
The bollard is operated with 24Vdc; an amperometric sensor detects any obstacles when rising and inverts the movement
immediately. The bollard is fitted with 12 leds that operate in sequence and with a high-visibility reflecting band. The bollard
can be easily unlocked in an emergency. In the event of a power cut different functions can be selected: the bollard can
remain in raised position or can be unlocked and lowered by keeping the emergency button pressed; automatic lowering
in the event of a power cut is also available (accessory). The system can also be fitted with an uninterrupted power supply
unit (accessory) that allows the bollard to be used in automatic mode even in the event of a power cut.
The foundation case is manufactured in cataphoresis-painted steel and can easily be assembled on site before installation.
If the bollard is not installed immediately, a cover for closing the hole is available.
MODEL
Power supply
Motor power supply
Motor power
Motor absorption (24 Vdc)
Maximum working frequency
Protection level
Working temperature
Lubrication
Cylinder dimensions
Foundation case dimensions
Impact resistance
Breaking strength
Rising time
Lowering time
Weight
Finish
12 - VIGILANT - rev.01
General information and technical specifications

General information

TECHNICAL DATA

Diameter 200x500 mm - thickness 8 mm (Vigilant 500I: +1,2mm Stainless Steel AISI 316)
Vigilant 500: Black cataphoresis + powder paint / Vigilant 500I: Stainless Steel AISI 316
VIGILANT 500/I
230/250 Va.c. 50/60 Hz
24 Vdc
90 W
6 A
50 cycles/h
IP 68
-20°C / +50°C
Permanent grease
Diameter 330x1008 mm
11.000 J (without permanent deformation)
180.000 J
4"
3"
Vigilant 500: 84 kg / Vigilant 500I :90 kg