Publicité
Les langues disponibles
Les langues disponibles
C
DOUBLE
ACTION
1. Use the DOUBLE ACTION mode by closing the air-tap to pump the
board up to 7 psi.
2. Switch to SINGLE ACTION position by opening the air-tap to pump the
board up to 15 - 18 psi.
3. After inflation, return the valve cover and tighten in clockwise direction
to lock in place.
• Electric Pumps can be used to inflate board up to 80-90%. However, the
remaining pressure required should be achieved by using the hand
pump to avoid over-inflation.
• Do not use air compressors as this voids warranty of board.
• Before long trips, ensure the board has been inflated and has
maintained pressure for a minimum of 24 hours.
SINGLE
ACTION
PRECAUTION & TIPS
Inflate Faster With Less Effort
• Use full range of the pump
cylinder while keeping your
arms extended.
• Bend your knees and use the
body weight.
9
Publicité
