Sunny SF-T1407M Mode D'emploi page 9

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
、
STEP 3:
Attach the Main Frame (No. 1) to the Right &
Left Upright Supports (No. 4 & No. 5) using 2
Flat Washers (No. 19) and 2 Bolts (No. 15).
Tighten and secure with Allen Wrench (No.
43).
Connect the Lower Sensor Wire (No. 22A) to
Sensor Wire (No. 46).
STEP 4:
Attach the Handlebar (No. 6) to the Right &
Left Upright Supports (No. 4 & No. 5) using 2
Arc Washers (No. 18) and 2 Bolts (No. 16).
Tighten and secure with Allen Wrench (No.
44). Next, connect the Lower Sensor Wire (No.
22A) to the Upper Sensor Wire (No. 22B).
Open the battery cover of the Computer (No. 8),
insert 2 AA batteries, and close the cover.
Connect the Upper Sensor Wire (No. 22B) to
the link wire of Computer (No. 8) and slide
Computer (No. 8) onto the computer holder
located on the Handlebar (No. 6).
Place 2 Decorative Covers (No. 7) onto the
Handlebar (No. 6).
Screw the Lock Knob (No. 10) into the holes of
the Left Upright Support (No. 5) and Main
Frame (No. 1).
The assembly is complete!
8