Publicité
Les langues disponibles
Les langues disponibles
Nail drill Use Instructions
– Turn the control ring to the left (anti-clockwise rotation) or to the right (clockwise rotation)
to switch the device on.
Don't change the forward & reverse knob too frequently, otherwise it will damage the drill.
The two buttons marked with plus (+) and minus (-) allow you to select the speed of ro-
tation.
Start every application at low speed and increase it only as required.
– All file and cutting attachments are coated with a sapphire grain. This guarantees extre-
mely long life and almost guarantees freedom from wear.
– Do not exert heavy pressure and always guide the attachments carefully over the surface
to be treated.
– Move the instrument under light pressure in circular movements slowly over the parts
to be treated.
– Note that the cutting attachments will have a reduced effect if the skin is softened or
moist. For this reason, do not carry out any pretreatment in a bath.
– Do not remove all the callus skin in order to retain the natural protection of the skin.
– Always ensure that the spindle can rotate freely. It must never be permanently jammed,
otherwise the instrument will become too hot and suffer damage.
– After every use, apply moisturizing cream to the parts treated.
Important:
Check the results during treatment. This is particularly important for diabetics, since their
hands and feet are less sensitive.
3.2 Attachments
Since the attachments are of a high quality and improper use can lead to injury, we ask
that you handle the attachments carefully. At high speeds in particular, we advise that you
proceed with caution.
When filing, always work from the outside of the nail towards the tip!
Always check results regularly during treatment. As soon as the application becomes
unpleasant, stop the treatment.
13
Publicité
