Publicité
Les langues disponibles
Les langues disponibles
EN
Dear customer, thank you for purchasing one of our Uniteck products. Please read all instructions carefully
before using the product.
UNICONNECT 1.6
To connect the panel/controller/battery, we recommend that you use the Uniconnect 1.6 ready-to-use
kit, which optimizes your electrical performance and simplifies installation.
The Uniconnect kit is equipped with flexible solar cable with tinned copper core. They are resistant to
extreme conditions (-40°C- to 120°C). With a cross-section of 6 mm², they optimize the useful power of
your installation by guaranteeing you a minimum voltage drop.
They can be easily and quickly connected to the panels using their MC4 connector. They are equipped
with a fuse kit to protect your installation and battery and are supplied with a UV-resistant waterproof
roof pass, battery terminals and cable guides.
COMPOSITION
Uniconnect is composed of:
•
2 x 8 m of 6mm² black and red solar cables with fast solar connectors to connect the panel(s) to
the controller.
•
Waterproof and UV-resistant roof and wall pass.
•
A battery connection kit, composed of 2 x 2 m of 6mm² black and red solar cables to connect the
regulator to the battery, a fuse protection kit to protect the installation from any battery
malfunctions and battery terminals as well as terminal covers.
SAFETY INSTRUCTIONS
•
Take appropriate measures to prevent accidents during your assembly work.
•
If the bracket and mounting material are exposed to sunlight for a long period of time, there is a
risk of burning. Protect yourself.
•
At the end of the work, check that your supports and panels are securely fastened.
For the proper functioning of the controller, please observe the following order of connection:
To disconnect, please proceed in reverse order. For more information, refer to the user manual of your
charge controller.
8/19
Controller connection > battery
Panel connection > controller
Controller connection > electrical consumer
www.uniteck.fr
Publicité
