Publicité
Les langues disponibles
Les langues disponibles
Installation
Choose a location that is not near a heat source or on something that moves
(like a door). For non-mounting locations, choose a place where the doorbell
will be easy to hear.
Install Doorbell
If you are not mounting the doorbell to the wall,
place it where you want it.
1. Mount the screw on to the wall using the
supplied anchor if necessary. Leave 2 mm of
the screw sticking out from the wall.
Drill 1/4 inch (6.3 mm) holes for the anchor.
2. Hang the doorbell on the screw.
Install Push Button
1. Mount the push button bracket
in the desired location.
Use the screws
–OR–
Use the adhesive backing. If
using the adhesive backing,
clean the surface first.
2. Snap the push button onto the
mounting bracket.
Note: If you need to remove the push button, use a small
screwdriver to release the tab.
–OR–
3
Publicité
