Type Plate Overview; Serial Number Structure - DST AQ-30B Manuel Utilisateur

2 INTRODUCTION

2.1 TYPE PLATE OVERVIEW

1. Model designation
2. Serial number
3. Electrical supply information
4. Regeneration heater power

2.2 SERIAL NUMBER STRUCTURE

which does not match the current structure.
Nr DR-50bb.000cddd
1. Model designation
2. Regeneration heater (a) - the type of heater the unit is equipped with.
R = Resistive (electric)
G = Gas
S = Steam
3. Special unit ( ) - code to indicate a special manufactured unit
SP = Special
The absence of SP indicates a standard manufactured unit; e.g. DR-50RSP is a special manufactured unit, and DR-50R is a standard manufactured unit.
4. Serial number (c) - to indicate whether the unit belongs to a special or standard manufactured series
0 = Standard manufactured series
7 = Special manufactured series
5. Serial number (ddd) - serial number of the manufactured unit (ddd)
001, 002, 003, 004...
AQ-30, 31 EN.02
HW = Hot water
WW = Warm water
D = Diesel
O = Oil
RECUSORB DR-50R
Nr DR-50R.0000XXX
3 x 400V ~ 50Hz
P motors 0.23kW
P tot
I tot
Electric heater P nom 4 kW
Seibu Giken DST AB
Avestagatan 33
16353 SPÅNGA, Sweden
Nr DR-50abb.000cddd
9
4.3 kW
10 A
Seibu Giken DST
EN