Garmin GTM 21 Instructions page 5

Connecting Your GTM 21
1. Remove the vehicle power cable from your
Garmin GPS.
2. Connect the cable on the GTM 21 to the
power connector on your Garmin GPS.
3. Plug the other end into a power outlet in
your vehicle.
4. Use the suction cups to route the antenna
vertically on the windshield. We recommend
routing it a few inches away from, and
parallel to, the A-pillar.
To.power.outlet.
in.vehicle
Power.
Status.
LED
LED
5. Route the cable so that it does not interfere
with vehicle operating controls.
GTM.21.Instructions.
Route.on.windshield.using.
To.power.connector.
on.Garmin.GPS
the.suction.cups.
Antenna
EN–3