Publicité
Les langues disponibles
Les langues disponibles
b. If the LED shows "E01" or "E02", the lift motors have overheated. Allow the device to
cool down for 18 minutes. The device should not be constantly adjusted for more than 2
minutes.
c. If " " or " " do not work, unplug the device, wait 10 seconds, then reconnect to power.
d. If you experience any other issue, or the above-mentioned troubleshooting remedies do
not work, reset the device.
1. Power supply: AC110V-240V,50/60Hz, 15A
2. Service Environment: 0-40
3. Check carefully to ensure correct and complete assembly before using.
4. Be familiar with all functions of the product before first use.
5. Never allow children to play with the device.
6. Disconnect from power before cleaning, wipe with a dry cloth only.
7. Do not clean with corrosive or abrasive materials.
8. Clean up spills immediately. Do not let any liquid enter the device. This poses a risk of electric shock.
9. If the power cord, power supply, motors, or other components become damaged, discontinue use
immediately.
4
ATTENTION
47.96.60.v3_117014-1
Publicité
