Publicité
Assembly
7
Put the receiver into the
②
Bracket and arrange the wires
Adjust the position of Canopy,
③
Place the receiver in the holder,
then lock it
Coloca el receptor en el soporte,
Step 4 (Light kit installation)
Placez le récepteur dans le support.
Assembly Instructions
Installation of light cover
①
Assembly Instructions
9
Step 4
(Blades and
Light kit installation)
Installation of light cover
Align the blades with the mounting holes,
①
and then fix them with screws.
Installation of light cover
③
Step 5(Switch on and ceiling fan works)
Tighten the diffuser of the light kit.
Enrosca el difusor del kit de luz.
Serrez le diffuseur du kit d'éclairage.
ON
11
Step 5(Switch on and ceiling fan works)
ON
ON
DONE!!!
House power
FAN
Assembly Instructions
Step 4 (Light kit installation)
.3.
Installation of light cover
①
Remove the pre-installed screws.
Connect the light kit cable, and then lock
②
②
the light kit.
Step 5(Switch on and ceiling fan works)
ON
.4.
Montaje
③
8
Assembly Instructions
Tighten the screws.
Apriete los tornillos.
Serrez les vis.
OK
②
②
10
OK
Insert
Montage
Adjust the position of Canopy
then lock it
OK
①
Forward / Reverse
④
Swtich
Forward / Reverse
Swtich
②
AAA 1.5V
no incl
Forward / Reverse
⑤
Swtich
Publicité
