Publicité
Les langues disponibles
Les langues disponibles
H. Vollmer GmbH
5. Installation/Commissioning
This product may only be installed by a qualified specialist electrician.
Before the installation is done, the connection lines to the building must be disconnected from the
power supply and protected against being switch on accidently. Take the appropriate automatic circuit
breakers out of the junction box in the building.
Make sure that the foundation is suitable to support the weight of the LED-Spotlight, permanently and
reliably.
Saw out the installation dimensions at the desired site. Use the permanently assembled holding clips to
fasten the LED Spotlight. Make sure that no connections are damaged.
Now wire up the connection lines of the building installation at the screw terminals of the
light/transformer/junction box. The brown (or black) cable is usually the phase conductor. Connect this
to the terminal marked with an "L". The blue conductor must be connected to the terminal marked with
an "N".
Do not bend the cable; make sure that the cable and the plug are free from any tractive and torsional
forces. Protect all cables and insulations from any possible damage.
Check the proper connections once again.
Switch on the circuit breakers of the junction box in the building once again.
6. Functional faults
The LED spotlight does not switch on
Is the switch of the LED spotlight on the wall turned on?
Is the transformer correctly assembled and connected?
Check the connected lines
7. Technical data
Article
Connection
23176
230V~, 50Hz~,
Trafo
sec. 18-35VDC, 260mA , max. 6W
23177
230V~, 50Hz~,
Trafo
sec. 12-24vDC, 500mA, max. 11W
23178
230V~, 50Hz~,
Trafo
sec. 12-24VDC, 500mA, max. 15W
23179
230V~, 50Hz~,
Trafo
sec. 18-35VDC, 260mA, max. 6W
23180
230V~, 50Hz~,
Trafo
sec. 12-24VDC, 500mA, max. 11W
23181
230V, 50Hz~,
Trafo
sec. 13-26VDC, 700mA, max. 18W
Installation instructions Art. No: 23176, 23177, 23178, 23179, 23180, 23181, Page 2 of 3
LED-Spotlight
Ø 75mm, Installation 55mm,
max. 6W, 396lm, 3000K,
Ø 125mm, Installation 105mm,
max. 11W, 725lm, 3000K
Ø 155mm, Installation 125mm,
max. 15W, 1055lm, 3000K,
75mm x 75mm, Installation 55mm,
max. 6W, 396lm, 3000K
125mm x 125mm, Installation 105mm,
max. 11W, 816lm, 3000K,
185mm x 185mm, Installation 165mm,
max. 18W, 1466lm, 3000K
Protection
Protection
type
class
IP65
III
IP20
II
IP65
III
IP20
II
IP65
III
IP20
II
IP65
III
IP20
II
IP65
III
IP20
II
IP65
III
IP20
II
®
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach Stein
Status 20.11.2018
Publicité
