ATHENA CHAMPION 70950 Mode D'emploi page 2

advancing 1/4 turn at a time, until replacement
cartridge cap is flush against handpiece head.
Caution: Cap should be tightened securely
with "T" wrench to insure safe positioning of
cartridge.
B
efoRe
1. Install bur securely into cartridge. Roll bur
between fingers to make sure bearing turns
freely. If any resistance, friction or grittiness is
encountered installing replacement cartridge
or bur does not turn freely between fingers...do
not operate handpiece. Return entire handpiece
and replacement cartridge to your dealer for
installation.
2. Lubricate handpiece with handpiece lubricant/
cleaner such as Athena Clave-N-Spray or
Champ-Lube™ 20+ in accordance with daily
maintenance instructions.
3. Connect handpiece to air/water supply and
operate foot control. Do not operate without bur
securely fastened in cartridge.
4. After handpiece has been put into service,
lubricate, at least, once daily or in accordance
with manufacturer's instructions.
Warranty: This part is warrantied to the original
purchaser against defective workmanship and
materials under normal installation, use and
service for six months. For warranty repair, send
the product with copy of the original invoice to
your dealer.
INSTRUCTIONS FOR USE /
MODO DE EMPLEO / MODE D'EMPLOI /
GEBRAUCHSANWEISUNG / BRUKSANVISNING:
www.athenachampion.com
© 11/12 21100219A
o
peRatIng
135˚C
H
andpIece