Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

IMPORTANT INSTRUCTIONS -
Models: B900, B1125
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN
THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY
When using electrical appliances, basic precautions should always
be followed to reduce the risk of fire, electric shock and injury to
WARNING:
THIS BLOWER ASSEMBLY MUST BE
INSTALLED WITH TRANSFORMER ASSEMBLY MODEL XFMR129:
WARNING:
OF FIRE, ELECTRIC SHOCK AND INJURY TO
PERSON, OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer.If you
have questions, contact the manufacturer.
b) Before servicing or cleaning the unit, switch power off at service panel
and lock the service disconnecting means to prevent power from
being switched on accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning device, such as
a tag, to the service panel.
WARNING:
OF FIRE, ELECTRIC SHOCK AND INJURY TO
PERSON, OBSERVE THE FOLLOWING:
a) Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and standards,
including fire-related construction.
672018 Rev. H 1-16
OPERATING MANUAL
AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY INFORMATION
person, including the following:
TO REDUCE THE RISK
TO REDUCE THE RISK
SAVE THESE INSTRUCTIONS
b) Sufficient air is needed for proper combustion and exhausting of
gases through the flue (chimney) of fuel burning equipment to prevent
back drafting. Follow the heating equipment manufacturer's guideline
and safety standards such as those published by the National Fire
Protection Association (NFPA) and the American Society for Heating,
Refrigeration, and Air Conditioning Engineers (ASHRAE), and the local
code authorities.
c) To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off power unit.
d) Read all instructions before installing or using range hood.
e) Refer to the instructions included with the Range Hood Canopy for
additional safety information.
www.airkinglimited.com
Profesional Series
CAUTION:
FOR GENERAL VENTILATING USE
ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR
EXPLOSIVE MATERIALS AND VAPORS.
Blower
1 of 8

Publicité

loading

Sommaire des Matières pour Air King Profesional Serie

  • Page 1 IMPORTANT INSTRUCTIONS - OPERATING MANUAL Profesional Series Models: B900, B1125 Blower READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2 THIS BLOWER IS INTENDED FOR USE ONLY lining up the 8 holes in the blower mounting flange to the 8 screw IN AIR KING PROFESSIONAL SERIES RANGEHOOD CANOPIES studs of the hood (Figure 3). MARKED SUITABLE FOR USE WITH THIS BLOWER. DO NOT INSTALL IN ANY OTHER APPLICATION.
  • Page 3 SECTION 4 2. Install transformer into hood canopy by lining up the 2 holes on the flange of the transformer with the 2 screw studs in the top left side Finishing the Installation of the hood canopy. Use 2 of the included #8-32 screws to make the connection and fully tighten (Figure 2).
  • Page 4 REPLACEMENT PARTS DIAGRAM Qty. Description Replacement Part # Capacitor Box 5S1136114 Transformer (B900) 5S1136513 Transformer (B1125) 5S1136512 Fuse 5S1136131 www.airkinglimited.com 672018 Rev. H 1-16 4 of 8...
  • Page 5 INSTRUCTIONS IMPORTANTES – MODE D’EMPLOI Ventilateur de la série Modèles: B900, B1125 Professionnelle LIRE ET CONSERVER CES INSTRUCTIONS LIRE SOIGNEUSEMENT AVANT DE TENTER D’ASSEMBLER, INSTALLER, OPÉRER OU DE RÉPARER LE PRODUIT DÉCRIT. PROTÉGEZ VOUS-MÊME ET LES AUTRES EN OBSERVANT TOUTE L’INFORMATION DE SÉCURITÉ.
  • Page 6 COUVERCLES DE HOTTE DE CUISINIERE DES SERIES PROFESSIONNELLES Transformateur Figure 2 DE AIR KING MARQUEES APPLICABLES POUR UTILISATION AVEC CETTE SOUFFLANTE. NE PAS INSTALLER DANS TOUTE AUTRE INSTALLATION. 2. Installez lâchement les deux écrous à collets dentelés #10-32 (inclus) sur les goujons situés à l’intérieur du centre supérieur de la hotte.
  • Page 7 SECTION 3 Écrou Installation dans un couvercle à une hauteur de 25,4 cm Rondelle 1. Enlever la plaque au bas à l’arrière de ce couvercle de hotte de cuisinière. Elle est fixée en place avec une écrou et une rondelle des deux côtés (Figure 5).
  • Page 8 DIAGRAMME DES PIÈCES DE REMPLACEMENT # de pièce de Qté. Description remplacement Boîte de condensateur 5S1136114 Transformateur (B900) 5S1136513 Transformateur (B1125) 5S1136512 Fusible 5S1136131 www.airkinglimited.com 672018 Rev. H 1-16 8 of 8...

Ce manuel est également adapté pour:

Profesional b900Profesional b1125