BTI Akku-Ladegerat 36 V Notice Originale page 17

Product description and
specifications
English
Intended use
English
The battery charger is intended for charging the
rechargeable BTI Li-Ion batteries.
Product Features
English
The numbering of the components shown refers
to the diagram of the charger on the graphics
page.
(1) Rechargeable battery
(2) Green battery charge indicator
(3) Red battery charge indicator
(4) Charging bay
(5) Battery charge indicator
(6) Temperature monitoring indicator
(7) Cord wrap
A) Accessories shown or described are not included
with the product as standard. You can find the com-
plete selection of accessories in our accessories
range.
Technical Data
English
Battery charger
Article number
Battery charging voltage
(automatic voltage de-
tection)
Charge current
Permitted charging tem-
perature range of the re-
chargeable battery
36 V 4.0 Ah re-
chargeable battery:
Charging time at battery
capacity, approx.
– 4.0 Ah
Standard batteries:
Charging time at battery
capacity, approx.
– 1.3 Ah
– 1.5 Ah
– 2.0 Ah
– 2.6 Ah
– 3.0 Ah
– 4.0 Ah
– 5.0 Ah
– 6.0 Ah
1 609 92A 5RB • 7.7.20
A)
A)
A)
36 V battery
charger
9 096 522
V 14.4–36
A 8.0
°C 0–45
80 %/100 %
min 32/51
80 %/100 %
min 10/25
min 10/25
min 15/30
min 15/30
min 20/35
min 25/35
min 35/45
min 35/55
Battery charger
Number of battery cells
Weight according to
EPTA-Procedure
01:2014
Protection class
Operation
English
Start-up
English
Note the mains voltage! The voltage of the
u
power source must match the voltage specified
on the rating plate of the charger. Chargers
marked with 230 V can also be operated with
220 V.
Charging process
English
The charging process begins as soon as the
mains plug for the charger is inserted into the
mains socket and the battery (1) is inserted into
the charging slot (4).
Thanks to the intelligent charging process, the
charge condition of the battery is automatically
detected and then charged up with the optimal
charge current depending on battery temperature
and voltage.
In this way, the battery is treated with care and re-
mains permanently fully charged when it is stored
in the charger.
What the display elements mean
Flashing green battery charge level indicator (2)
The rapid-charging procedure is indic-
ated by flashing of the green battery
charge level indicator (2). The battery
can be removed at any time and used.
Note: The charging process is only possible when
the temperature of the battery is within the permit-
ted charging temperature range, see section
"Technical data".
Once approx. 80% of the battery capa-
city has been reached, the flashing of
80 %
the green battery charge indicator
slows down. The rapid-charging pro-
cess is now completed. If the battery
remains in the charger, the charging process will
be completed in the Long Life charging mode.
Continuously illuminated green battery charge
level indicator (2)
English
The continuous light of the green bat-
tery charge level indicator (2) signals
that the battery is fully charged.
The battery can then be removed for
immediate use.
36 V battery
charger
4–30
kg 0.82
/ II
English
English
English | 17