Black+Decker HSMC1321 Mode D'emploi page 12

English
owned and authorized service centers are listed online at www.
blackanddecker.com.
This warranty does not apply to accessories. This warranty
gives you specific legal rights and you may have other rights
which vary from state to state or province to province. Should
you have any questions, contact the manager of your nearest
BLACK+DECKER Service Center. This product is not intended for
commercial use, and accordingly, such commercial use of this
product will void this warranty. All other warranties, express or
implied, are hereby disclaimed.
PROBLEM
• Unit will not start.
• Mop will not make steam. • No water in water tank.
• Mop leaves water on floor. • Cleaning pad is too wet. • Unplug unit from power outlet
• Mop left spot on floor.
For assistance with your product, visit our website www.blackanddecker.com for the location
of the service center nearest you or call the BLACK+DECKER help line at 1-800-544-6986.
10
TROUBLESHOOTING
POSSIBLE CAUSE
• Cord not plugged in.
• Main switch not on.
• Floor head not correctly
fitted.
• Handle not fitted
correctly.
• SmartSelect dial is
TM
not turned on.
• Circuit fuse is blown.
• Circuit breaker is tripped. • Reset circuit breaker. (If the
• Cord or switch is
damaged.
• SmartSelect dial is
TM
not turned on.
• SmartSelect dial is
TM
turned up too high.
• Mop left in one spot too
long.
• Hard water.
Imported by Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286
BlackandDecker.com
1-800-544-6986
LATIN AMERICA: This warranty does not apply to
products sold in Latin America. For products sold in Latin
America, check country specific warranty information
contained in the packaging, call the local company or see
the website for such information.
FREE WARNING LABEL REPLACEMENT: If your
warning labels become illegible or are missing, call 1-800-544-
6986 for a free replacement.
POSSIBLE SOLUTION
• Plug appliance into a working outlet.
• Turn main switch on.
• Ensure floor head is correctly
attached.
• Fit Handle correctly
• Turn SmartSelect
setting.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a BLACK+DECKER
service center or authorized
servicer.)
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a
BLACK+DECKER service center or
authorized servicer.)
• Have cord or switch replaced
at a BLACK+DECKER Service
Center or Authorized Servicer.
• Add water to the water tank.
• Turn SmartSelect
setting.
and change the micro-fiber
cleaning pad.
• Adjust SmartSelect
or increase the amount of steam
being produced.
• Never leave the steam mop on
the floor with a damp or wet
cleaning pad still attached when
not in use.
• Use distilled water.
dial to desired
TM
dial to desired
TM
dial to reduce
TM