Logiflex ELEVATION PLUS Guide De L'utilisateur page 2

Precautions
1. Ensure there are no obstacles in the desk's path.
2. If you encounter an obstacle during the height adjustment, stop the table by pressing on the arrows (up or down).
3. If you encounter an obstacle during a programmed height adjustment, stop by pressing any of the buttons.
4. Ensure the table is not in contact with any walls or panels.
5. Ensure all cables are the appropriate length to accommodate the height adjustment.
6. Children must be supervised when using this product.
7. There is a risk of injury and/or electric shock if not properly installed.
8. Keep liquids away from electrical components.
9. Do not sit or stand on the table.
10. Do not sit or stand under the table.
11. Do not place any object taller than 508 mm (20") under the desk.
12. Do not open any of the electrical components. There is a danger of electric shock.
13. This product is designed with a duty cycle of 10% (2 min. on and 18 min. off).
14. In the event of a power outage or if the power cord is unplugged, a manual reset may be necessary.
Control Pad Instructions
Digital Memory Memory Arrows
Display Key Buttons Up or Down
Control Pad Information
1. Use the arrows or to reach the desired height.
2. Press . The height will flash.
3. Then press on a number ( , or ) to save the height on the selected button.
4. To use the stored height, press the corresponding number.
Reset the Table
1. Press and hold until the table goes down to the lowest.
2. Release when RST disappears and the lowest height is displayed.
February 19, 2021 LOGIFLEX | ELEVATION PLUS - USER'S GUIDE 2 2