Description Of The Appliance; Ktu Configurations Available - AERMEC KTU Mode D'emploi

DESCRIPTION OF THE
1.
APPLIANCE
KTU is a contacts expansion board for
the connection to area temperature/
humidity probes (supplied) and to the
mixer valves (not supplied). It allows
total control via the AERMEC heat
pump regulator of the independent
environment areas. The
temperature and/or humidity probes
have been designed to be applied
in the heating, cooling
conditioning sectors. They are used in
heating and air conditioning systems.
They have such aesthetics to be used in
civil environments. They are set-up for
wall mounting.
The kit is available in the version
for controlling from one to three
independent environments, according
to the different kits purchased.
The layout below
components that interact with the KTU.
2.

KTU CONFIGURATIONS AVAILABLE

Digital outputs
Configuration Q.ty Controlled devices
n° 1 PUMP (Area 1)
STANDARD 2 n° 1 res.integ/boiler or
pump (Area 2)
AREA 1 KIT n° 1 Dehumidifier
n° 1 pcOe 2 (Area 1)
expansion n° 1 pump (Area 2)
AREA 2 KIT n° 2 Dehumidifiers
n° 1 pcOe 3 (Area 1 and 2)
expansion n° 1 pump (Area 2)
AREA 3 KIT n° 3 Dehumidifiers
n° 2 pcOe 5 n° 2 pumps (Area 1,2
expansions and 3)
electronic
and air
illustrates the
Digital inputs
Q.ty Controlled devices
n° 2 room
2 thermostats
(Area 1 and 2)
0 none
n° 1 room thermostat
1
(Area 2)
N°2 room thermostat
2
(area 2 and 3)
VM
ME
Analogue inputs
Q.ty Controlled devices
n° 2 sonde
temperatura di
2
mandata impianto
per mix (zona 1 e 2)
n° 1 room
1
probe TH
n° 2 TH room probes
(Area 1 and 2)
2
n° 1 mix probe for
system from HP
n° 3 sonde ambiente
TH (Zone 1-2-3)
n° 1 Sonda
4
temperatura di
mandata impianto
per mix 3
0-10 V analogue outputs
Q.ty Controlled devices
n° 1 mixer
1
valve (Area 1)
n° 1 mixer
1
valve (Area 2)
n° 1 mixer
1
valve (Area 2)
n° 2 mixer
2 valves (Areas 2 and
3)
KTU_5890967_00 15