Use - Veripart VPSZ105 Manuel D'instructions

Accessories
For the benefit of the different cleaning objectives, attach the
accessories to the tube or handle of the hose by sliding them firmly on
the tube or handle.
1. Round nozzle: can be used to clean furniture, corners of the
sealing and blinds
2. Upholstery nozzle: can be used to clean matrasses, seats of chairs
and pillows.
3. Crevice nozzle: can be used to clean corners and tight areas
which cannot be reached with the combi-brush.
4. Mini-turbo brush: can be used to easily clean seats of chairs and
sofas, matrasses and car seats.
5. Parquet brush: the parquet brush is provided with real natural hair.
The long soft hairs prevent scratches on the floor.
The parquet brush is suitable for parquet floors, laminate or wood
floors and all other smooth and hard floors.

5. USE

Check that the voltage stated on the information plate matches the voltage used in your
region.
Switching on the vacuum cleaner
1. Place the vacuum cleaner on a sturdy and flat surface.
2. Carefully pull the cord out of the vacuum cleaner until you reach the required length and
insert the plug in a power socket.
3. Switch on the vacuum cleaner by pressing the on/off button
4. Depending on the surface to be cleaned, you can adjust the suction power. Use the +
and - button on the handle or vacuum cleaner to set the required suction power. The
active modes light up.
minimum suction power
medium suction power
maximum suction power
5. Depending on the surface to be cleaned, you can adjust the brushes in the floor nozzle.
When cleaning hard floors, you must make sure the brushes are extended.
When cleaning floor coverings or floor cloths, the brushes must be retracted.
When it is difficult to move the floor nozzle over the floor, you can adjust the suction
power with the + and - button on the handle.
2 2
Delicate materials, curtains
Furniture cushions, high quality carpets, rugs
Normal carpets and mattresses
Long pile carpets
Hard floors such as tile, wood and pvc floors.
1
3
5
with your foot.
2
4