Prior To First Use; Assembly - Veripart VPSZ105 Manuel D'instructions

3. PRIOR TO FIRST USE

Follow these instructions when using the vacuum cleaner for the first time: carefully remove
the vacuum cleaner and all accessories from the packaging and remove all packaging
material. Keep the packaging (plastic bags and cardboard) out of reach of children. After
unpacking the appliance, carefully check it for external damage that may have occurred
during transport. Place the vacuum cleaner on a sturdy, dry and flat surface.

4. ASSEMBLY

Make sure the plug of the vacuum cleaner is not inserted in a socket when (dis)assembling
accessories or parts.
Hose
Connecting the hose to the vacuum cleaner: insert the end of the hose in the hose connection
on the vacuum cleaner and turn it clockwise with a firm twist until you hear a click sound.
Disconnecting the hose from the vacuum cleaner: check that the plug is not in a power socket.
Turn the end of the hose counter-clockwise to disconnect it from the vacuum cleaner.
Handle with remote control
By means of the ergonomic remote control on the handle, you are able to switch the vacuum
cleaner on and off and control the suction power. In order to be able to control the vacuum
cleaner with the remote control, you must first switch on the vacuum cleaner with the on/off
button on the vacuum cleaner itself.
1. Open the battery cover on top of the handle and place the batteries. Note the
indications for the + and - pole.
2. Control the suction power with the + and - button. The active modes on the vacuum
cleaner light up.
3. Press the on/off button
Telescopic tube
1. Connect the handle of the hose into the telescopic tube until it clicks.
2. Set the telescopic tube to the desired length. To do this, pull the slide button upwards
and pull the top part of the tube out of the bottom part to make it longer. Release the
slide button and let the tube snap into place.
3. Attach the floor nozzle by firmly sliding the tube into the nozzle.
4. Disconnect the hose from the tube press the button of the click system and pull the hose
handle out of the tube.
2 1
to switch off the vacuum cleaner or switch it on again.