KENMORE ELITE CSV|Max Manuel D'entretien Et D'utilisation page 16

CLEANING THE MOTORIZED NOZZLE & BLOCKAGES
Brush Roll Reset
If the brush roll is blocked or overloaded,
the unit will automatically stop power.
Switch the unit off and remove the
obstruction.
Hose Blockage Removal
1. To clean out the hose, press the wand
release button on the motorized nozzle,
and pull the motorized nozzle away
from the wand.
Wand Release Button
2. Carefully remove any debris or blockage
from the inside of the hose. Reattach the
motorized nozzle onto the wand.
3. Once the blockage is removed, start the
vacuum to ensure air flow through the
hose.
CAUTION
Do not use scissors or other sharp objects
to remove a blockage from the hose.
NOTE:
It is recommended to store
the vacuum within a temperature range
between 39.2°F (4°C) and 104°F (40°C).
- 16 -