Description; Specifications - MSA Workman FP Stryder Manuel D'instructions

2

Description

The Workman FP Stryder is an I-beam anchorage connector. The intended purpose of each element
of the Workman FP Stryder is given in sections 2.2 "Attachment Elements" through 2.4 "D-Ring
Connector" below. See inspection diagram for location of elements.
9
1
2
3
4
5
6
7
8
9
10
11
2.1

Specifications

US
Capacity
Weight
Flange capacity
Materials of
construction
When used as part of a personal fall arrest system, fall arrest forces must not exceed 1800 Ibf (8 kN).
6
6
1
8 7
Jaw and locking button-2
D-ring-1
D-ring connector-1
Spacer-1
Cross bar-1
Glide pad-2
Barrel screw (-4) and bolt (-6)
Pin-2
Screw-2
Label-2
Load indictor
400 lbs (182 kg) including weight of the user plus tools, clothing and other user-
borne objects.
Model 10144431
Model 10144432
Model 10144431
Model 10144432
Housing, Button, Spring,
pin, D-ring connector
Glide pads
D-ring
Crossbar
5 4
2 3
11
5 lbs (2.3kg)
11.9 lbs (5.4 kg)
4.00 inch (10.2cm) to 13.5 inch (34.3cm)
14.00 inch (35.6cm) to 23.5 inch (59.7cm)
Stainless steel
Teflon impregnated thermal plastic.
Alloy steel
Model 10144431
Model 10144432
WORKMAN FP STRYDER
10
Aluminum alloy
Alloy steel