Publicité
Les langues disponibles
Les langues disponibles
QUICK USER GUIDE FREEDOM S
1
Unscrew the head from left to right
and fill the tank with water and salt
200ml
1g
2
Shake
4-5
x
www.aquama.com
3
Switching on the unit
Wait for the procedure to end
3
sec
www.aquama.com
avoid affecting the quality of
4
aquama
Indigo
®
The system shuts down automatically
after 3 minutes.
Light indication
• When the device is working,
the blue LED light is on.
START
• While charging, the red light is on.
• After the charging is completed,
the green light switches on and
the device can be used normally.
Check battery status
• Batteries have no charge:
blue LED lights are not bright,
indicating that batteries have no charge.
• Low capacity battery:
In the process of aquama
solution production, if the red lights are
on or the red light flashes, it means that
the aquama
battery is low. When the power is less
than 25%, it indicates that the device
needs to be charged.
3
min
Virucidal procedure:
END
For a virucide solution, put 2 spoons
of salt (2g) in 200ml of water and do
4 activations. Reactivate the solution
every day. This procedure guarantees
the EN 14476 et EN 14476+A2
(hand disinfection) certification.
Don't press the switch
during production to
solution.
©
Indigo
®
©
Indigo
solution generator
®
©
Publicité
