Erase Codes; Live Data; View Freeze Frame - Autophix OBDMATE OM123 Manuel De L'utilisateur

4.2 Erase Codes

Notes:
This function is performed with key on engine off . Do not start the engine.
Before performing this function, make sure to retrieve and record the
trouble codes.
After clearing, you should retrieve trouble codes once more or turn
ignition on and retrieve codes again. If there is still some trouble codes for
hard troubles, please find the reason caused the trouble code firstly, and
then solve the problem. Now, the trouble codes can be erased.

4.3 Live Data

The OBD II Scan Tool is a special diagnostic tool that communicates with
the vehicle's computer. The Scan Tool lets you view "real-time" Live Data.
This information includes values (volts, rpm, temperature, speed etc.) and
system status information (open loop, closed loop, fuel system status,
etc.) generated by the various vehicle sensors, switches and actuators.
Press ENTER

4.4 View Freeze Frame

When an emission-related fault occurs, certain vehicle conditions
are recorded by the on-board computer. This information is referred
to as freeze frame data. View Freeze Data is a snapshot of the
operating conditions at the time of an emission-related fault.
14
EN