Lifting And Lowering Loads - Marshalltown DL11-11 Mode D'emploi

Use the winch to crank the mast up or down into the desired position.
Any unstable load must be balanced and secured to the cradle prior to lifting.
Turn winch crank clockwise to elevate the load, while watching for overhead obstructions.
Turn the winch handle counter clockwise to lower the load.
Each handle is equipped with two mounting positions. With the handles mounted in the
"high speed" position, the operator can raise and lower the lift in half the time.
STANDArD
MOuNTING
POSITION
CAUTION
Make sure the floor surface is level.
!
WARNING
No riders allowed on this unit. This is not a personnel lift and
!
never should be used for hoisting or moving people.

LIFTING AND LOWERING LOADS

hIGh SPEED
MOuNTING
POSITION
7