Arregui CE 1034 Instructions page 9

CE1034_EN
OPENING
OPENING WITH USER CODE: Enter the user code and press OK. For a
FIRST OPENING, use the initial user code (1234).
OPENING WITH MASTER CODE (in those cases where the user code has
been misplaced): Enter the master code (initial, 4321) and press OK.
Important: When using the master code, the user code is initialised to
1234.
CHANGE OF OPENING CODE
CHANGE OF MASTER CODE:
•Enter the master code and press OK.
•Press OK again until the green light flashes. Then enter the new master
code and press OK.
CHANGE OF MASTER CODE:
•Enter the master code and press OK.
•Press OK again until the green light flashes. Then enter the new master
code and press OK.
BLOCKING OF LOCK
If you enter 4 incorrect codes consecutively, the lock will be blocked for
60 seconds.
11