THERAGUN Waveroller Mode D'emploi page 5

Charging the Wave Roller
1. After turning off the device, plug the
power adapter into the charging port.
2. The LED light on the power button will
flash until fully charged.
3. Charging is complete when the LED light
on the power button is solid green.
4. Battery level is continuously displayed on
the LED light of the power button when
the device is on. To view battery level
when the device is off, briefly press the
power button and the LED battery light
will flash to indicate the battery level.
™
Charging the Wave
Roller Wirelessly
Battery level on the Wave Roller is
indicated with the following colors:
Flashing red: Low charge
Flashing blue: Half-way charged
Flashing green: High charge
Solid green: Fully charged
EN