Windhager Mole-Stop 1000 Mode D'emploi page 32

Anti-taupes
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Accessories
/
Disposal / protect. t. environment
In order to prevent re-infestation, the
device must be left working continu-
ously (P1). Driving the animals away
again is time-consuming and
much more dificult than preventing
re-infestation.
Occasionally it is possible that a par-
ticularly stubborn mole will react with
increased digging activity in the irst few
days. In this case, as in the event of se-
vere infestation, move program selector
switch to P2 .
Function test:
a) The power supply check is activated
by pressing the "TEST" button and
indicated by the LED (green) (Fig. 22).
b) When the device is switched "ON "
a long continuous vibration takes place
(Fig. 20).
Then the random interval program starts
(P1, P2). The intensity regulator acti-
vates in the voltage-dependent control
range. If this is not the case, the power
supply must be checked for correct op-
eration (a). If this is unsuccessful, send
device and power supply and completed
warranty note or receipt for checking to
the responsible service location or your
specialist dealer.
32
Accessories
230V ADAPTER (Fig. 23) - Item No.
08102, with 2 metre connecting cable.
The capacity is suficient for 3 devices;
signiicant greater intensity emission due
to 9V output voltage.
SOLAR BATTERY (Fig. 24) - Item No.
08130, Solar power supply with built-in
NiCad battery 6V/600 mAh. Suficient for
4 to 5 days without sun.
CONNECTING CABLE 20 m (Fig. 25)
Item No. 08020, for connecting between
two devices or for extending the adapter.
Disposal and protecting the
environment
Our devices are manufactured at a high
quality level for a long period of use.
Regular maintenance and proper repairs
by our customer service can increase
the service life of the device. If a device
is defective and can no longer be re-
paired, please pay attention to:
This product must not be
disposed of with the normal
domestic waste. Please send
this product to Hand in to an
assigned collection point for recycling
electrical or electronic devices. By col-
Mole-Stop

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mole-stop solar0210002102

Table des Matières